Neon Flex Lettering & Logos Using Mini Pro 24VDC.
Neon Flex Lettering & Logos Using Mini Pro 24VDC.
We often get asked how to make lettering and logos using LED Neon Flex. There is no right or wrong way of doing this but to help our customers we have made a few guidelines that will help you chose the correct items required to make up your sign. Please Note: DDS UK are not sign makers and we do not make up signs. We only provide the materials. All Neon Flex can be used for lettering and logos but our recommendation is 24VDC Mini Pro; with 120 LED's per metre just 50mm cut unit and small size of 15 x 8mm, it is ideal for making up all Lettering and logos. At just £12.80 + VAT per metre and the option to augment this with dimmable remotes and wifi led smart controls, this is a great product for all your needs.
Firstly we suggest that you look at the Neon Flex options to familiarize yourself with the type of LED Neon Flex and accessories that are available. Next, consider height. This will depend on the type of neon you wish to use. Below is a table giving you the minimum recommended height that LED Neon Flex can be used to make up lettering. Lower heights can be achieved if you are bending only; however, if you are cutting and joining then we recommend that 3 cut lengths of any of the 24VDC products is the basis of your lettering.
MINIPRO Warm White 24VDCEK-MINIPRO-24V-WM - £12.80
|
24VDC Mini Pro LED Neon Flex | |||
This purpose made Neon flex is ideal for all your Signage, Lettering and Logo requirements. At a small size of just 8 x 15mm and 120 LEDs per metre giving a bright smooth light output . With a cutting length of only 50mm it makes Mini Pro the ideal Neon Flex for all signage applications. Use the pin connector range found in the accessories page | ||||
Neon Flex Type | Profile and size | Lateral Bend Radius | Cutting length | Minimum Height |
Mini Pro 24VDC | 40-45mm | All Colours 50mm | 150mm | |
Standard 240VAC | 55-60mm | 240VAC 1000mm for all colours | 1 metre if bending; 3 metres if cutting | |
Standard 24VDC | 24VDC 200mm for all colours | 600mm | ||
Mini 24VDC | 40-45mm | 24VDC All colour | 150mm (smaller without any cuts) | |
360 Degree 240VAC | 50-55mm | 240VAC All Colours | 1 metre if bending; 3 metres if cutting | |
360 Degree 24VDC | 24VDC All Colours | 600mm (smaller without any cuts) | ||
SMD RGB 24VDC | 60-70mm | RGB | 500mm (smaller without any cuts) |